If you are looking to clean your concrete floors, a steam cleaner is the best option. Steam cleaners use pressurized steam to deep clean and sanitize surfaces, making it the most effective way to clean concrete floors.
Not only does it remove all the dirt, grime, and stains, but it also penetrates the pores of the concrete, leaving it looking and smelling fresh and new.
Types of Concrete Finishes and Tips To Clean Them
Unsealed Concrete
Unsealed concrete is the most common type of concrete used in residential and commercial buildings. It is also the easiest to clean and maintain. You can use a steam mop or a pressure washer to clean unsealed concrete floors.
The high heat and pressure of the steam will remove all the dirt, grime, and stains from the floor. If you are using a pressure washer, make sure to hold it at least 12 inches away from the surface of the concrete.
Polished Concrete
Sealed or polished concrete is one of the best choices for withstanding the test of time, foot traffic, and spills. Not to mention, it is easy to maintain and clean. If you have a polished concrete floor, then steam cleaning is the best way to keep it looking shiny and new. Here is how you can steam clean, polished concrete:
First, sweep or vacuum the floor to remove any dirt or debris.
Next, fill your steamer with clean water and attach the appropriate attachment for cleaning concrete.
Then, start steaming your floor in small sections, working your way across the entire surface.
Ensure to move the steamer slowly, so it has time to loosen any dirt or grime. After steaming the entire floor, go over it with a clean mop or cloth to remove any residue.
Epoxy Coated Concrete
Epoxy is a popular coating for concrete floors in both residential and commercial settings. It is durable and easy to clean, making it an excellent option for high-traffic areas.
However, epoxy can be challenging to remove if it becomes damaged or stained. When steam cleaning epoxy-coated concrete, it is essential to use a low-pressure setting and avoid harsh chemicals or abrasives.
Experts recommend using adjustable steam pressure to clean your concrete floor. The steam temperature must be between 170 and 210 degrees.
After the steaming process, they will use a fine-grade nylon brush attachment to cover the entire surface. It helps loosen any dirt or grime that may be embedded in the pores of the concrete.
Stamped or Stained Concrete
There are two types of stamped concrete: imprinted and embossed. Imprinted concrete has a pattern or image stamped into the surface while it’s still wet. Embossed concrete is stamped after it dries and hardens.
When steam cleaning stamped concrete, you must be careful not to damage the stamping. Use a soft-bristle brush attachment on your steam cleaner and go over the floor in a back-and-forth motion. Be sure to hold the steam cleaner close to the floor so you don't blast the stamps with too much pressure.
Call EnviroDek Concrete Resurfacing for concrete floor polishing in Atlanta. Our team of experts can help you choose the right concrete floor cleaning and polishing method for your needs.
